The 2-Tier Mobile C-Shaped Side Table is a compact and practical solution for everyday use, ideal for positioning beside sofas, beds, or home office areas. Featuring a raised top tray, a stable base panel, and smooth-rolling castors, it offers easy movement and everyday convenience. The curved support legs provide reliable structural strength while maintaining a modern, space-saving design suited to a range of indoor settings.
Warning & Safety Instructions
Before assembling this product, please read and follow all safety instructions carefully:
- Adult assembly is required
- Assemble on a flat, clean and stable surface
- Do not fully tighten bolts until all parts are correctly fitted
- Keep children and pets away during assembly
- Do not use the table if any parts or fixings are missing or damaged
- Lock the castors once assembly is complete to prevent unwanted movement
- Do not exceed the recommended load capacity
Unboxing Your Table: What’s Included
Remove all items from the package and confirm that all parts and hardware are present before starting assembly.
Parts List
| Part No. | Quantity | Description |
| 1 | 1 | Top Tray |
| 2 | 1 | Bottom Tray |
| 3 | 2 | Curved Support Frame |
Hardware List
| Hardware | Quantity | Description |
| A | 16 | M6×12 Bolts |
| B | 2 | Locking Casters |
| C | 2 | Standard Casters |
| D | 1 | Allen Key |
| E | 1 | Open-End Wrench |
Step 1: Attach the Curved Support Legs to the Base Panel
- Place the Top Tray (1) flat on a clean, stable surface with the pre-drilled holes facing upwards.
- Position both Curved Support Frame (3) onto the marked fixing points on the base panel, ensuring the curved sections arch upwards and the mounting plates sit flush against the surface.
- Align the holes in each support leg plate with the corresponding holes in the base panel.
- Insert M6×12 Bolts (A) through the mounting plates and into the base panel (4 bolts per support leg, 8 bolts in total).
- Use the Allen Key (D) to tighten the bolts evenly, securing both support legs firmly in place.
Step 2: Install the Casters onto the Base Panel
- Turn the Bottom Tray (2) upside down so the underside is facing upwards.
- Locate the castor fixing holes at each corner of the base panel.
- Attach the Locking Castors (B) to the designated positions (as shown in the diagram), ensuring the locking levers face outwards for easy access.
- Attach the Standard Castors (C) to the remaining positions.
- Insert each castor stem into the pre-drilled holes and hand-tighten initially.
- Use the Open-End Spanner (E) to fully tighten all castors until they are securely fixed to the base panel.
Step 3: Connect the Top Assembly to the Base Panel
- Lock the Locking Castors (B) and keep the Bottom Tray (2), with castors installed, positioned on the floor.
- Carefully place the assembled Top Tray and Curved Support Frame (1 + 3) over the base.
- Align the lower mounting plates of the Curved Support Frame (3) with the pre-drilled holes in the Bottom Tray (2).
- Insert the M6×12 Bolts (A) (4 bolts per leg, 8 bolts in total).
- Fully tighten all bolts using the Allen Key (D).
Step 4: Assembly Complete and Ready for Use
- Confirm that the Top Tray (1) is securely fixed to both Curved Support Frame (3), with no visible gaps at the mounting plates.
- Check that the Curved Support Frame (3) is firmly fastened to the Bottom Tray (2) and stand evenly without any leaning.
- Gently apply pressure to the tabletop to ensure the structure is stable and does not wobble.
- Verify that all M6×12 Bolts (A) are fully tightened using the Allen Key (D) and that all castors rotate smoothly.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table feels unstable | Bolts not fully tightened | Retighten all M6×12 bolts |
| Table rolls unexpectedly | Locking casters not engaged | Lock the front casters |
| Casters wobble | Casters not fully secured | Tighten using open-end wrench |
| Tabletop uneven | Uneven floor surface | Move to a level surface |
Care & Maintenance
- Clean using a soft, dry or slightly damp cloth
- Do not use abrasive cleaners or harsh chemicals
- Wipe spills immediately to prevent surface damage
- Keep locking casters engaged when the table is stationary
With its mobile design, raised tabletop, and sturdy curved support legs, the 2-Tier Mobile C-Shaped Side Table (SKU:83B-272V00BN) provides a practical and reliable solution for daily use. Proper assembly and regular maintenance will ensure long-lasting stability, smooth movement, and dependable performance over time.
You can also download the 2-Tier Mobile C-Shaped Side Table assembly manual for reference.
FAQs
1. Can a rolling C-shaped table be used as a bedside table?
Yes, rolling C-shaped tables work excellently as bedside tables. Their design allows the base to slide under the bed whilst the top surface hovers over it. The mobility adds convenience for repositioning as needed.
2. Do mobile C-shaped side tables damage floors?
Mobile C-shaped tables typically don’t damage floors if they have rubberised or soft-wheel castors. Hard plastic wheels on hardwood can cause scratches. Choose castors designed for your specific floor type.
3. Are lockable wheels necessary on a mobile side table?
Lockable wheels aren’t strictly necessary but are highly recommended for safety. They prevent the table from rolling away when placing items on it. This feature is especially important near beds or sofas.