The HOMCOM Console Table with Faux Marble Top is a modern and sturdy hallway or living room table designed for decorative display and everyday functionality. With its solid Tabletop, reinforced metal support frame, dual U-Shaped Legs, and integrated crossbar system, this unit offers strong structural balance. The addition of an Anti-Tip Safety Strap enhances safety, making it suitable for placement against a wall in busy household areas.
Warning & Safety Instructions
Before assembling this product, carefully read and follow all safety guidelines:
- Adult assembly is required
- Assemble on a flat, clean, and stable surface
- Keep children and pets away during assembly
- Always secure the Anti-Tip Safety Strap to the wall after assembly
- Do not use the table if any parts or hardware are missing or damaged
- Do not exceed the recommended weight capacity
- Use the Adjustable Feet to ensure the table sits level
Unboxing Your Table: What’s Included
Remove all packaging materials and confirm all parts and hardware are present before beginning assembly.
Parts List
| Part No. | Quantity | Description |
| 1 | 1 | Tabletop |
| 2 | 2 | Support Frames |
| 3 | 1 | Long Crossbar |
| 4 | 1 | Center Connector |
| 5 | 2 | U-Shaped Legs |
| 6 | 1 | Anti-Tip Safety Strap |
Hardware List
| Hardware | Quantity | Description |
| A | 8 | Short Bolt M6×10 |
| B | 4 | Medium Bolt M6×22 |
| C | 8 | Long Bolt M6×40 |
| D | 4 | Adjustable Feet |
| E | 8 | Spacer |
| F | 1 | Small Screw |
| G | 1 | Long Wall Screw |
| H | 1 | Wall Anchor |
| I | 1 | Allen Key |
Step 1: Assemble the Leg Frame Structure
- Place the two Support Frames (2) upright on a clean, flat, and stable surface, ensuring the fixing plates at the bottom are facing inward toward each other.
- Position the Long Crossbar (3) between the lower mounting plates of both Support Frames (2), aligning the pre-drilled holes correctly as shown.
- Insert the Medium Bolts M6×22 (B) through the mounting holes in the Long Crossbar (3).
- Attach the Center Connector (4) across the upper inner section between the two Support Frames (5), aligning the holes carefully before fastening.
- Secure the Center Connector (4) using the remaining Medium Bolts (B) and tighten lightly using the Allen Key (I).
- Screw one Adjustable Foot (D) into the top threaded hole of each Support Frames (2) as illustrated, turning clockwise until secure.
Step 2: Secure the Upper and Lower Frame Connections
- Position the assembled leg structure upright on a stable surface, ensuring the Long Crossbar (3) and Center Connector (4) are properly aligned between the U-Shaped Legs (5) as shown in diagram.
- Align the fixing brackets of the Center Connector (4) with the top inner mounting plates of the U-Shaped Legs (5).
- Insert the Short Bolts M6×10 (A) through the aligned holes at the top connection points and tighten lightly using the Allen Key (I).
- Next, align the mounting plates of the Long Crossbar (3) with the lower inner fixing points on both U-Shaped Legs (5).
- Insert the remaining Short Bolts (A) through the lower mounting holes and into the threaded inserts of the legs (5).
- Tighten all Short Bolts (A) evenly using the Allen Key (I), ensuring the frame remains square and stable.
Once all eight Short Bolts (A) are installed, fully tighten them to secure the entire metal frame structure.
Step 3: Attach the Tabletop to the Frame
- Place the Tabletop (1) upside down on a clean, protected surface to prevent scratches, ensuring the pre-drilled holes are facing upward.
- Carefully position the assembled metal frame onto the underside of the Tabletop (1), aligning the mounting holes of the U-Shaped Legs (5) and Long Crossbar (3) with the corresponding pre-drilled holes in the tabletop.
- Insert one Spacer (E) into each mounting position between the metal frame and the Tabletop (1) as illustrated.
- Insert the Long Bolts M6×40 (C) through the frame mounting holes and Spacers (E), then into the pre-drilled holes of the Tabletop (1).
- Tighten each Long Bolt (C) gradually using the Allen Key (I), working in a balanced sequence to ensure even pressure and proper alignment.
Once all eight Long Bolts (C) and Spacers (E) are installed, fully tighten them to securely fix the frame to the Tabletop (1).
Step 4: Install the Anti-Tip Safety Strap
- Carefully turn the table upright and move it into its final position against the wall, ensuring it stands level on all Adjustable Feet (D).
- Locate the fixing point on the rear upper frame and position the Anti-Tip Safety Strap (6) against the metal frame as illustrated.
- Secure one end of the Anti-Tip Safety Strap (6) to the frame using the Small Screw (F), tightening it firmly with a screwdriver.
- Mark the wall directly behind the strap fixing hole. Drill a suitable hole into the wall and insert the Wall Anchor (H).
- Align the free end of the Anti-Tip Safety Strap (6) with the wall anchor and insert the Long Wall Screw (G) through the strap and into the Wall Anchor (H).
- Tighten the Long Wall Screw (G) until the strap is firmly secured and the table is safely anchored to the wall.
Assembly Complete and Ready for Use
- Carefully check that all bolts (A, B, C) are fully tightened using the Allen Key (I), ensuring there are no loose connections in the frame structure.
- Confirm that the Tabletop (1) sits flush against the metal frame with no visible gaps between the mounting points and the support structure.
- Adjust the Adjustable Feet (D) at the base of each U-Shaped Leg (5) until the table stands level and does not wobble on the floor.
- Ensure the Anti-Tip Safety Strap (6) is firmly secured to both the frame and the wall using the Small Screw (F), Wall Anchor (H), and Long Wall Screw (G).
Once all stability checks are complete and the table is properly anchored, your HOMCOM Console Table (SKU: 837-684V00) is fully assembled and ready for safe everyday use.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table wobbles | Feet not adjusted | Adjust Adjustable Feet (D) |
| Frame misaligned | Bolts unevenly tightened | Loosen, realign, retighten |
| Table shifts | Anti-tip strap loose | Re-secure strap with wall anchor |
| Gaps under tabletop | Spacers misplaced | Check Spacer (E) positioning |
Care & Maintenance
- Clean with a soft, dry, or slightly damp cloth
- Avoid harsh chemicals or abrasive cleaners
- Periodically inspect and retighten bolts
With its reinforced metal frame, structural crossbar support, adjustable feet system, and integrated Anti-Tip Safety Strap, the HOMCOM Console Table with Faux Marble Top (SKU: 837-684V00) offers a stable and dependable solution for entryways, hallways, and living spaces. Proper assembly, secure wall anchoring, and routine maintenance will ensure long-lasting durability and everyday safety.
You can also download the HOMCOM Console Table with Faux Marble Top (SKU: 837-684V00) assembly manual for reference.
FAQs
1. How do you clean a faux marble table top properly?
Use a soft cloth with warm water and a mild washing-up liquid to wipe the surface gently. Avoid abrasive pads or strong chemical cleaners, as these can damage the finish. Dry the top afterwards to prevent streaks and keep the marble effect looking fresh.
2. Can a console table with faux marble be used in a hallway?
Yes, it is particularly well suited to hallways due to its slim profile and elegant appearance. It provides a practical surface for keys, post, or decorative accents without overwhelming narrow spaces. The marble-look top also adds a refined touch to an otherwise functional area.
3. Is a faux marble console table heat resistant?
Faux marble can tolerate light warmth, such as from a mug or decorative lamp, but it is not designed for direct high heat. Placing coasters or heat pads underneath hot items is advisable. This helps maintain the smooth finish and prevents long-term surface damage.