HOMCOM Full-Length Mirror with Stand Assembly Manual (SKU:831-323) 

The HOMCOM Full-Length Mirror with Stand is an elegant, freestanding mirror designed for easy viewing and storage. With its sturdy wooden frame and sleek finish, it enhances any room’s decor while serving a functional purpose. Ideal for bedrooms, dressing rooms, and hallways, the mirror provides a full-length reflection, perfect for daily grooming or outfit checks. This assembly guide will help you quickly set up your new mirror with ease.

Warning & Safety Instructions

Before beginning assembly or use of this mirror, please read and adhere to the following safety instructions:

• Only assemble with an adult present.
• Ensure that the mirror is mounted or placed securely on a flat surface.
• Keep all small parts away from children during assembly.
• Use only the provided screws and hardware to ensure stability.

Unboxing Your Mirror: What’s Included

Parts List

Part	Quantity	Description
A	1	Mirror Frame
B	2	Side Frames
C	2	Support Rails
D	1	Bottom Shelf
E	12	Screws
F	2	Eye-bolts
H	2	Cross Dowel Nut
I	12	Flat Washers
J	2	Wooden Dowels

Step 1: Assemble the Side Frames and Support Rails

1. Position the Side Frame Panels (B): Place the two Side Frame Panels (B) upright on a clean, flat surface with the inner sides facing each other.
2. Attach the Support Rails (C): Take the two Support Rails (C) and align them with the corresponding mounting holes on each Side Frame Panel (B).
3. Insert the Cross Dowel Nuts (H): Insert a Cross Dowel Nut (H) into the holes on the Support Rails (C), ensuring they are properly aligned.
4. Insert Screws (E): Use the Screws (E) to attach the Support Rails (C) to the Side Frame Panels (B). Insert the Screws (E) through the holes in the Side Frame Panels (B) into the Cross Dowel Nuts (H).
5. Tighten the Screws (E): Securely tighten the screws using the appropriate tool to ensure a stable connection.
6. Attach the Bottom Shelf (D): Place the Bottom Shelf (D) onto the base of the assembly and align it with the holes in the Side Frame Panels (B).
7. Secure with Screws (E): Attach the Bottom Shelf (D) using Screws (E) and tighten them firmly.

Step 2: Insert the Wooden Dowels

1. Insert the Wooden Dowels (J): Insert a Wooden Dowel (J) into the second hole at both ends to help secure the Mirror Frame (A) to the structure.
2. Position the Mirror Frame (A): Carefully lift the Mirror Frame (A) and position it against the frame structure.
3. Align the Holes: Align the holes on the Mirror Frame (A) with the corresponding holes in the frame structure.

Step 3: Attach the Mirror

1. Locate the Holes: On the side of the Mirror Frame (A), find the pre-drilled holes where the Eye-bolts (F) will be attached.
2. Insert the Eye-bolts (F): Insert the Eye-bolts (F) into the holes. Ensure that the eye portion of the bolts is facing outward.
3. Attach the Washers (I): Place the Washers (I) onto the opposite end of the Mirror Frame (A) hole, securing them onto the Eye-bolts (F).
4. Tighten the Eye-bolts (F): Use the appropriate tool to tighten the Eye-bolts (F), ensuring they are securely fixed to the Mirror Frame (A).

Step 4: Final Assembly and Checking Stability

1. Ensure the Mirror Frame (A) is Secure: After the Eye-bolts (F) and Washers (I) have been attached and tightened, ensure that the Mirror Frame (A) is stable and securely fixed to the side frames.
2. Check the Base Structure: Make sure that the base (the Bottom Shelf (D)) is properly aligned and that the assembly stands firmly without any wobbling.
3. Double-Check Screws and Dowels: Go over all the screws (if applicable) to ensure they are tightened and secure.

The mirror is now fully assembled and ready for use. Ensure all parts are properly tightened, and check for any loose connections.

Step 5: Install the Batteries

1. Open the Battery Compartment: Locate the battery compartment on the back of the mirror frame, as shown in the image.
2. Insert the Batteries: Place 6 x AA batteries into the compartment, ensuring that the positive and negative ends align correctly according to the markings inside the compartment.
3. Close the Battery Compartment: Once the batteries are in place, close the compartment securely.

This step ensures the mirror’s electrical functionality (if applicable, like lighting or other features) is set up and ready to go.

Troubleshooting Guide

Issue	Possible Cause	Solution
Mirror feels unstable	Screws not fully tightened	Tighten all screws properly
Side frames misaligned	Incorrect assembly	Realign frames and retighten
Bottom shelf is uneven	Misalignment of shelf placement	Adjust shelf and secure tightly

Care & Maintenance

• Wipe the frame and mirror with a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive cleaners to preserve the finish and clarity of the mirror.
• Regularly check the stability of the assembly, especially the screws and bolts.

With its sturdy construction and secure fittings, the HOMCOM Full-Length Mirror with Stand (SKU: 831-323) is designed for long-lasting use in any room. Proper assembly and regular maintenance will help ensure long-lasting performance and continued safety.

You can also download the official HOMCOM Full-Length Mirror with Stand manual for reference.

FAQs

1. What are the benefits of a mirror with a stand?

A mirror with a stand offers versatility, allowing for easy repositioning and use in different areas of the room. It provides full-length reflection, ideal for grooming or outfit checks. The sturdy stand also adds extra support and prevents tilting.

2. How do I choose the right mirror with a stand for my room?

Consider the size of your space and the style of your decor when selecting a mirror with a stand. Ensure the height is appropriate for your use, and choose a design that complements your room’s aesthetic, whether modern, vintage, or minimalist.

3. How do I clean a mirror with a stand?

To clean a mirror with a stand, use a microfiber cloth and a gentle glass cleaner to wipe the mirror surface. For the stand, dust regularly and wipe with a damp cloth, avoiding abrasive cleaners that could damage the finish.