HOMCOM Minimalistic Wooden Frame Accent Chair Assembly Instructions – SKU:835-233

Assembling the HOMCOM Minimalistic Wooden Frame Accent Chair is a quick and straightforward process that can be completed in approximately 20 minutes. This article covers each step in detail, from attaching the cushions to securing the wooden side frames, so you can complete the build correctly and safely.

What You Need to Know Before Starting

• Lay all parts on a flat, soft surface before beginning.
• Assembly requires one person.
• Do not fully tighten bolts until the final step.
• During Steps 1–3, tighten to 70% only.
• After Step 3, tighten all bolts to 100%.

What’s Included in the Box

Parts List

Code	Part Name	Quantity
A	Backrest Cushion	1
B	Seat Cushion	1
C	Side Frame (L & R)	1 set
J	Front Support Rail	1

Hardware List 

Code	Description	Quantity
D	M6 × 45 Bolt	8 (+1 spare)
E	Spring Washer	2
F	Flat Washer	2
G	Screw Cap Cover	8
H	Allen Key	1
I	Wooden Dowel	2 (+1 spare)

Step-by-Step Assembly

Follow the instructions below to assemble your HOMCOM Minimalistic Wooden Frame Accent Chair, with Padded Seat correctly, ensuring each component is aligned, secured, and tightened in the proper order for a stable and durable finish.

Step 1: Connect Backrest (A) to Seat Cushion (B)

1. Align the backrest (A) with the rear of the seat cushion (B).
2. Carefully peel off the dust cover on the underside of the seat cushion (B) to expose the internal mounting holes.
3. Insert the bolts (D) through the spring washer (E)) and flat washer (F).
4. Tighten the bolts using the Allen key (H).
5. Tighten to 70% only; do not fully tighten yet.

Check that backrest and seat are properly aligned before moving to next step.

Step 2: Attach Left Side Frame (C – Left)

1. Insert wooden dowels (I) into the pre-drilled upper holes of the front support rail (J).
2. Position the left side frame (C – Left) against the seat structure.
3. Align bolt holes carefully as shown in the picture.
4. Insert bolts (D) and tighten using the Allen key (H).
5. Keep bolts at 70% tightness for adjustment flexibility.
6. Ensure the front support rail (J) is properly aligned between frame sections. 

Step 3: Attach Right Side Frame (C – Right)

1. Position the right side frame (C – Right) onto the opposite side.
2. Align all connection points with the seat and front support rail (J).
3. Insert bolts (D) and tighten with the Allen key (H).
4. Once alignment is confirmed, tighten all bolts fully to 100%. Reattach the dust cover on the underside of the seat cushion.

Check that both side frames are symmetrical and level before final tightening.

Step 4: Insert Screw Cap Covers (G)

1. Locate all 8 visible bolt holes across both Left and Right side frames
2. Take Screw Cap Cover (G) and press firmly into each bolt hole
3. Ensure all caps are flush and secure for a clean finish

✔️ Assembly Complete

Final Inspection Checklist

• Confirm all bolts are tightened fully.
• Ensure the chair sits level on the floor.
• Check armrests are stable and secure.
• Gently test weight before regular use.

Care & Maintenance

• Tighten bolts periodically to maintain stability.
• Clean with a soft dry cloth.
• Avoid excessive moisture on wooden components.
• Do not exceed recommended weight limits.

Troubleshooting

Issue	Solution
Chair feels unstable	Re-check bolt tightness on both side frames using Allen Key (H).
Bolt not aligning	Loosen surrounding bolts slightly, realign the frame, then retighten.
Screw cap not fitting	Ensure the bolt head is fully tightened and sitting flush before pressing the cap into place.
Frame not sitting flush	Check Wooden Dowels (I) are fully inserted before tightening the bolts.

Customer Support & Assistance

If you experienced any difficulty during assembly or discovered a missing or damaged part, please contact Aosom Customer Support. Our team is committed to resolving the issue quickly and ensuring you are fully satisfied with your purchase.

You can download the complete assembly manual of the HOMCOM Minimalistic Wooden Frame Accent Chair (SKU:835-233), with Padded Seat for your reference.

FAQs

1. What happens if I skip the 70% tightening rule and go straight to 100%?

Tightening bolts to 100% too early locks the frame into a fixed position before all parts are properly aligned. This can cause the frame to sit at a slight angle or create stress points on the wood that weaken the structure over time.

2. What should I do if I lose the Allen Key?

A standard M4 Allen Key (hex key) can be purchased as a replacement from any hardware store. Ensure it fits snugly before use to avoid stripping the bolt heads.

3. Is this chair suitable for outdoor use?

No. This chair is designed for indoor use on level flooring only. Exposure to rain, humidity, or direct sunlight can damage the wooden frame and cushion fabric over time.