The Open Wardrobe on Wheels (SKU:831-208V81GN) is a practical and mobile wardrobe solution designed for organized clothing storage. Featuring a built-in closet rod, middle shelving system, and smooth-rolling casters (including locking wheels), this unit offers flexibility, stability, and efficient space usage. With a structured panel system and secure screw assembly, it ensures durability for everyday home use.
Warning & Safety Instructions
Before beginning assembly, please read and follow these instructions carefully:
- Adult assembly required
- Assemble on a flat, clean, and stable surface
- Keep children and pets away during assembly
- Do not use the product if any parts are missing or damaged
- Ensure locking casters are engaged after positioning
- Do not exceed recommended weight limits for shelves and rod
Unboxing Your Closet: What’s Included
Carefully remove all packaging and confirm all parts and hardware are present.
Parts List
| Part No. | Quantity | Description |
| 1 | 1 | Top Panel |
| 2 | 2 | Side Panels |
| 3 | 1 | Middle Vertical Divider |
| 4 | 1 | Middle Horizontal Shelf |
| 5 | 1 | Bottom Shelf |
Hardware List
| Hardware | Quantity | Description |
| A | 16 (+1 spare) | Plug Screws (Ø7×40mm) |
| B | 2 | Closet Rod Brackets |
| C | 1 | Closet Rod |
| D | 20 (+1 spare) | Screws (Ø3×14mm) |
| E | 2 | Standard Casters |
| G | 2 | Locking Casters |
| H | 1 | Allen Key |
Step 1: Attach the Divider to the Middle Horizontal Shelf
- Place the Middle Horizontal Shelf (4) flat on a clean, stable surface with the pre-drilled holes facing inward.
- Position the Middle Vertical Divider (3) perpendicular to Shelf (4), aligning the pre-drilled holes carefully.
- Insert the Confirmat Screws (A) through the outer panel into the edge of the divider.
- Tighten securely using the Allen Key (H) until the joint is firm and flush.
Step 2: Attach the Side Panels
- Take both Side Panels (2) and position them upright on either side of the previously assembled Middle Vertical Divider (3) and Middle Horizontal Shelf (4) structure.
- Align the pre-drilled holes on the Side Panels (2) with the corresponding holes on the divider and shelf assembly.
- Insert Confirmat Screws (A) through the outer side panels into the edges of the connected panels.
- Tighten all screws evenly using the Allen Key (H).
Step 3: Install the Top Panel and Bottom Shelf
- Carefully position the Top Panel (1) onto the upper edges of the assembled side panels and center divider. Align all pre-drilled holes.
- Insert Confirmat Screws (A) through the side panels into the Top Panel (1).
- Next, align the Bottom Shelf (5) with the lower section of the frame.
- Secure the Bottom Shelf (5) using additional Confirmat Screws (A) through the side panels and center divider.
- Tighten all screws evenly using the Allen Key (H) until the structure is firm and square.
Step 4: Install the Closet Rod Brackets
- Locate the pre-drilled holes inside both Side Panels (2) near the top section.
- Position one Closet Rod Bracket (B) on each side panel, ensuring they are aligned at the same height and facing inward.
- Secure each bracket using Screws (D) two screws per bracket.
- Tighten firmly to ensure both brackets are level and securely fixed.
Step 5: Install the Casters
- Position the standard casters (E) on two opposite corners as shown in image.
- Align the mounting plate holes and secure each caster using Screws (D) (four screws per caster).
- Attach the Locking Casters (G) to the remaining two corners using the same method and screws.
- Tighten all screws firmly to ensure the casters are securely mounted.
Step 6: Install the Closet Rod
- Ensure both Closet Rod Brackets (B) are securely installed and aligned at the same height.
- Hold the Closet Rod (C) horizontally above the brackets.
- Lower the rod carefully into the bracket openings on both sides.
- Confirm that the rod sits fully and securely inside both brackets.
Your wardrobe cabinet is now fully assembled and ready for use.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Unit feels unstable | Screws not tightened | Retighten all Plug Screws (A) |
| Closet rod loose | Brackets misaligned | Reposition brackets (B) and tighten Screws (D) |
| Unit rolls unintentionally | Locking casters not engaged | Engage locks on Casters (G) |
| Structure uneven | Assembly on uneven surface | Move to flat surface and adjust |
Care & Maintenance
- Clean with a soft dry or slightly damp cloth
- Do not use abrasive cleaners
- Avoid excessive moisture exposure
- Periodically check screws and caster tightness
- Engage locks when unit is stationary
With proper assembly and routine maintenance, the Open Wardrobe on Wheels (SKU: 831-208V81GN) will provide long-lasting, practical storage for your clothing and essentials.
You can also download the Open Wardrobe on Wheels assembly manual for reference.
FAQs
1. Are wheeled wardrobes suitable for carpeted floors?
Yes, wheeled wardrobes can be used on carpet, but thicker piles may make movement slightly harder. Opt for larger, smooth-rolling castors to improve glide and reduce drag. Locking wheels also help keep the unit stable once positioned.
2. Do open wardrobes collect more dust?
Open wardrobes may gather dust more quickly than enclosed units because garments are exposed to air circulation. Regular light cleaning and garment covers can help maintain freshness. Placing the wardrobe away from windows or high-traffic areas also reduces build-up.
3. Can you use an open wardrobe as a room divider?
An open wardrobe can work well as a subtle room divider, especially in studio flats or shared spaces. Choose a sturdy frame with balanced shelving so it looks neat from both sides. Styling it thoughtfully keeps the space feeling organised rather than cluttered.