AIYAPLAY Baby Clothing Rack Assembly Instructions (SKU:316-025V80PK)

This AIYAPLAY kids clothes rack is designed to help children organize clothes neatly while keeping items within easy reach. The sturdy A-frame structure includes a lower storage box and a top hanging rail with child-friendly hooks. Assembly must be completed by an adult before use.

• Estimated Assembly Time: ~30 minutes
• Recommended People: 1 adult
• Age Suitability: 3+ years (adult assembly and supervision required)

Safety & Warning Instructions

⚠️ READ CAREFULLY BEFORE ASSEMBLY

• CHOKING HAZARD: Contains small parts. Not suitable for children under 3 years.
• Keep children away during assembly.
• Use only on a flat, clean, and level surface.

Tools Required

• No power tools required
• Screwdriver (recommended)

Unboxing & Package Contents

Parts List

No.	Part Name	Quantity
1	Short Side Panel	2
2	Long Side Panel	2
3	Bottom Panel	1
4	Outer Legs (for Hanging Rod)	2
5	Inner Legs	2
6	Hanging Rod	1
7	Cloth Hanger	3

Hardware List

Code	Hardware	Size	Quantity
A	Bolt	M6 × 40	8
B	Barrel Nut	10 × 10	8
C	Screw	M6 × 16	8
D	Screw	M5 × 45	2

Step-by-Step Assembly Instructions

Follow the steps below carefully to assemble the AIYAPLAY Baby Clothing Rack correctly. Complete each step in order before moving on to the next.

Step 1: Assemble the Storage Box Frame (First Three Sides)

1. Place one Short Side Panel (1) upright on a flat surface, with the pre-drilled holes facing inward.
2. Position two Long Side Panels (2) on the left and right sides of the short panel, aligning the pre-drilled holes.
3. Insert Barrel Nuts (B) into the inner holes of the long side panel(2), making sure the nut openings align with the bolt holes.
4. From the outside of the short side panels(1), insert Bolts (A) and thread them into the barrel nuts(B).
5. Hand-tighten the bolts only. Do not fully tighten at this stage to allow for alignment in later steps.

You should now have a U-shaped three-sided frame, as shown in the diagram.

Step 2: Install the Bottom Panel

1. Take the Bottom Panel (3) and hold it horizontally.
2. From the open side of the frame, slide the panel inward along the internal support ledges as shown in image. 
3. Push the panel fully into place until it sits flush with the side panels.
4. Ensure the bottom panel lies flat and level inside the frame.

Step 3: Close the Storage Box

1. Take the remaining Short Side Panel (1).
2. Position it on the open side of the frame, with the pre-drilled holes facing inward.
3. Insert Barrel Nuts (B) into the inner holes of the long side panels(2).
4. From the outside of the short side panel(1), insert Bolts (A) and thread them into the barrel nuts.
5. Once all four sides are connected and properly aligned, evenly tighten all 8 bolts. Then fully tighten all the nuts.

Ensure the storage box is square, stable, and free of gaps.

Step 4: Attach the First A-Frame Leg Assembly

1. Place the storage box upright on the floor.
2. Take one Outer Leg (4) and one Inner Leg (5).
3. Position them on the left side of the storage box (when facing the front) to form an inverted A-frame as shown in image.
4. Align the upper ends of the two Legs and secure them together using 1 Screw (D) with Hanging Rod (6) as shown in image. 
5. Now align the pre-drilled holes on both Legs with the mounting holes on the storage box.
6. Secure each Leg to the storage box using 2 Screws (C) per Leg (4 screws total). Do not fully tighten yet.

Step 5: Install the Outer Legs and Secure the Hanging Rod

1. Take the remaining Inner Leg (5).
2. Position it vertically on the right side of the storage box (when facing the front), as shown in the diagram.
3. Align the pre-drilled holes on the Inner Leg with the mounting holes on the top of the storage box.
4. Secure the Inner Leg to the storage box using 2 Screws (C).
5. Do not fully tighten yet, leave loose for alignment in the next step.

Step 6: Final Assembly, Accessories & Safety Check

Complete the Second A-Frame Leg Assembly:

1. Take the remaining Outer Leg (4).
2. Position it diagonally on the right side of the storage box (when facing the front), mirroring the left-side Outer Leg from Step 4.
3. Align the lower end of the Outer Leg with the base of the storage box and secure using 2 Screws (C).
4. Align the upper end of the Outer Leg with the top of the Hanging Rod (6) and secure using 1 Screw (D).
5. Fully tighten all screws and recheck all bolts, ensure nothing is loose.

Install Accessories:

• Hang the three Cloth Hangers (7) onto the Hanging Rod (6).

Stability Check:

• Gently press on the top hanging rod, storage box corners, and A-frame Legs to confirm the structure is stable and secure.
• Rock the rack gently side-to-side to ensure there is no wobbling.

Before Use – Safety Check

Verify that:

✓ All screws and bolts are tightened securely
✓ The rack stands evenly without wobbling
✓ Storage box panels are aligned with no visible gaps
✓ A-frame Legs are stable and perpendicular to the floor
✓ The hanging rod is level and firmly secured
✓ No loose parts or sharp edges are present
✓ Clothes hangers move freely on the rod

Care & Maintenance

Regular Cleaning:

• Wipe clean using a dry or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals.
• Dry immediately if exposed to moisture.

Maintenance:

• Inspect all screws and connections monthly.
• Retighten any loose hardware as needed.
• Check for wear, cracks, or damage regularly.
• Do not overload the rack beyond its intended capacity.

Troubleshooting Guide

Issue	Solution
Rack feels unstable or wobbly	Recheck all bolt and screw tightness. Ensure the rack is on a level surface.
Storage box panels not aligned	Loosen bolts, realign panels to be square, then retighten evenly.
Hanging bar is uneven or tilted	Ensure both A-frame Legs are fully secured at the same height.
Bottom panel doesn’t fit	Check orientation, the panel may need to be rotated 180°.
Screws won’t tighten	Verify you’re using the correct screw size for each location.
A-frame Legs spread outward	Tighten base joint screws (D) where Inner and Outer Legs meet.

You can download the assembly manual for the AIYAPLAY Baby Clothing Rack (SKU: 316-025V80) for your reference.

If you need replacement parts, assembly assistance, or have questions about this product, please contact Aosom Customer Service for reliable support and guidance.

FAQs

1. Can baby clothing rack be used on carpeted floors?

Yes, it can be used on carpet, but thick or uneven carpet may reduce stability. Place a flat board or firm mat underneath to create a more level base if needed.

2. Is it safe to move the baby clothing rack while fully loaded with clothes?

It is best to remove clothes before moving the rack. Lifting or dragging it while loaded may loosen connections or affect stability over time.

3. What should I do if my child tries to climb on the baby clothing rack?

This rack is not designed to support body weight. Teach children that it is for hanging clothes only and supervise younger users to prevent climbing or pulling.