The Outsunny Two-tier PE Rattan Square Coffee Table is built for everyday use, offering a sturdy frame, a practical mesh shelf, and a sleek glass tabletop. Following the correct assembly steps ensures stability, safety, and long-term durability. This guide is based on the official manual and keeps the process simple and accurate.
Before You Begin
Assembly takes around 30 minutes and involves three main steps. Prepare your workspace properly before starting.
- Lay all parts on a clean, flat surface.
- Check all components against the parts list.
- Place a soft cloth or rug underneath to prevent scratches.
- Keep hardware organised for easy access.
Important Safety Notes
- For domestic use only.
- Always assemble on a level, stable surface.
- Do not fully tighten bolts until all parts are aligned.
- Keep small hardware away from children.
- Handle the tabletop glass carefully to avoid damage.
What’s Included in the Box
Parts List
| Label | Quantity | Part Name |
| A | 4 | Table Leg |
| B | 1 | Tabletop Frame |
| C | 1 | Mesh Shelf |
| D | 1 | Tabletop Glass |
Hardware List
| Label | Quantity | Hardware Name |
| E | 12 (+1 spare) | M6×15 Bolts |
| F | 12 (+1 spare) | Washers |
| G | 1 | Allen Key |
Step-by-Step Assembly Instructions
Follow these steps carefully to assemble your Outsunny Two-tier PE Rattan Square Coffee table (SKU: 867-164V00BN) correctly.
Step 01: Attach Table Legs to the Tabletop Frame
- Place the Tabletop Frame (B) upside down on a soft surface.
- Position all four Table Legs (A) at each corner.
- Align the holes on the table legs with the frame as shown in image.
- Insert M6×15 Bolts (E) with Washers (F) in each hole.
- Tighten lightly using the Allen Key (G) (do not fully tighten yet).
Tip: Keep the frame balanced and all table legs evenly positioned before moving forward.
Step 02: Install the Mesh Shelf
- Position the Mesh Shelf (C) between the tablelegs.
- Align the four corners with the inner mounting points of table legs as shown in image.
- Insert M6×15 Bolts (E) with Washers (F) at all four points.
- Tighten bolts gradually in a diagonal pattern.
After alignment:
- Fully tighten all bolts from Step 01 and Step 02.
Tip: If the shelf appears uneven, slightly loosen, adjust, and retighten evenly.
Step 03: Place the Tabletop Glass
Complete the assembly by fitting the top surface.
- Carefully turn the table upright.
- Place the Tabletop Glass (D) onto the Tabletop Frame (B).
- Ensure the glass sits evenly within the frame.
- Gently press down to secure it in place.
Your Outsunny Two-tier PE Rattan Square Coffee Table is now fully assembled.
Assembly Verification Checklist
Before using your table, please verify:
- All Frame Legs (A) are securely attached with no visible movement.
- The Mesh Storage Shelf (C) is level and does not flex when pressed.
- The Support Panel (D) sits flush against the frame with no gaps.
- The Tabletop (B) is completely level and does not rock.
- All M6×15 Screws (E) and Washers (F) are tight and secure.
- The Angle Bracket (G) at the corners shows no visible movement.
- No bolts feel loose. Re-tighten if needed.
Care and Maintenance Instructions
- Clean the table with a soft, damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that may damage the surface.
- Store in a dry, shaded area when not in use to prevent weather-related wear.
- Inspect regularly for signs of damage or wear; do not use if structural integrity is compromised.
Safety and Usage Notes
- Place the table on a level, stable surface before use.
- Do not stand or sit on the table.
- Inspect the table regularly for signs of damage or wear.
- Do not attempt to repair the table if structural integrity is compromised.
- Keep children away from loose bolts and small hardware components.
- Never leave the table unattended if weather conditions are extreme (high winds, heavy rain, or snow).
- If you are unsure about any part of the assembly process, please contact customer support before proceeding.
You can download the Outsunny Two-tier PE Rattan Square Coffee Table (SKU: 867-164V00BN) complete manual for your reference.
Need Assistance?
If you face any difficulty during assembly or notice missing parts, contact Aosom Customer Support. The support team will assist you quickly and ensure everything is resolved properly.
FAQs
1. Can this coffee table be assembled by one person?
Yes, one person can assemble it, but having a second person makes alignment easier, especially when positioning the frame and glass. Solo assembly may take slightly longer but is manageable with patience.
2. How do I protect the glass during long-term use?
Using coasters, placemats, or a thin protective pad helps prevent scratches and marks. Avoid placing heavy or sharp-edged objects directly on the glass surface.
3. Is it safe to move the table after assembly?
Yes, but always lift the table instead of dragging it. Dragging can loosen joints or damage the legs, especially on rough outdoor surfaces.
4. Can additional weight be placed on the mesh shelf?
The shelf is suitable for light to moderate items like books or décor. Avoid placing excessive weight, as it may affect the structure and alignment over time.
5. What is the best way to store the table during off-season months?
Store it in a dry indoor area or use a waterproof cover if left outside. Keeping it elevated slightly off the ground also helps prevent moisture damage.