A dual monitor stand helps raise screens to a comfortable viewing height, keeps the desk organised, and allows flexible positioning. This model features a three-panel adjustable platform that can be extended or arranged to suit different desk layouts.
These instructions explain how to assemble and set up a dual monitor stand. Each step is illustrated with clear diagrams to help you complete the assembly without confusion.
Before You Begin
Recommended Workspace
- Flat, clean surface
- Enough space to lay out all panels
- Soft cloth or cardboard to protect surfaces
Assembly Time
- Approximate time: 10 minutes
- People required: 1 person
Safety Notes
- Assemble the stand before placing monitors on it
- Do not overtighten fittings
- Keep small parts away from children & pets
What’s in the Box
Panels
| Part Number | Description | Quantity |
| ① | Centre Panel | 1 |
| ② | Side Panels | 2 |
| ③ | Inner Support Panels | 2 |
| ④ | Outer Support Panels | 2 |
Hardware Included
| Code | Hardware Type | Quantity |
| A | Cam Lock Nuts (15×10) | 8 (+1 spare) |
| B | Studs with Pins (M6×32) | 8 (+1 spare) |
| C | Allen Key (M4) | 1 |
Step-by-Step Dual Monitor Stand Assembly
Follow these steps to assemble your Dual Monitor Stand correctly and safely.
Step 1: Prepare the Centre Panel
Place Panel ① flat on your workspace.
- Insert 4 studs with pins (B) into the pre-drilled holes
- Tighten using the Allen key
- A general rule is that the pin should be located approximately at the mid-point of the nut’s cam race when contact is made.
Step 2: Attach Inner Support Panels
Position Panels ③ on both sides of the centre panel.
- Align the panels with the studs with pins already installed
- Insert cam lock nuts (A) into the support panels(3)
- Press down firmly so studs with pins enter the cam locks
- Turn cam locks clockwise until secure.
Ensure both panels are evenly aligned.
Step 3: Prepare the Side Panels
Lay each Panel ② flat.
- Insert 2 studs with pins (B) into each panel
- Tighten until the shoulders are seated.
- Repeat for the second panel
These panels will form the adjustable extensions.
Step 4: Attach Outer Support Panels
Connect Panel ④ to each side panel.
- Align the support panel with the studs with pins on Panel ②
- Insert cam lock nuts (A) into the outer support panels
- Press together and tighten cam locks clockwise.
Check that the supports sit squarely underneath.
Step 5: Final Assembly & Adjustment
Now bring all sections together.
- Slide the side panels onto the centre panel
- Adjust spacing to suit your desk width
- Ensure all joints sit flat and stable
You can arrange the stand in a straight line or extended layout depending on your setup.
Completed Setup
Once assembled, the dual monitor stand should feel solid with no wobble.
Final check before placing monitors:
- Check all cam nut screws are tight
- Confirm panels are level
- Test stability with light pressure
Once confirmed, your dual monitor stand is ready for daily use.
Care & Maintenance
Check fixings after moving the stand.
- Wipe with a dry or slightly damp cloth
- Avoid abrasive cleaners
- Recheck fixings every few months
Troubleshooting During Assembly
| Issue | Likely Cause | Solution |
| Panels feel loose | Cam locks not fully turned | Tighten clockwise |
| Panels won’t fit | Cam lock orientation wrong | Rotate and retry |
| Uneven surface | Panels not aligned | Loosen and realign |
You can download the full Dual Monitor Stand (SKU:923-044) manual for your reference.
For technical support, replacement parts, or product questions, contact Aosom LLC’s Customer Service and get friendly assistance.
FAQs
1. Can this stand be used with monitors of different sizes?
Yes, the adjustable three-panel design allows you to position screens of different widths. Just ensure both monitors sit fully within the panel surface for proper support.
2. Can I move the stand after assembly without taking it apart?
Yes, the stand can be moved as a single unit. However, lift it carefully from underneath and recheck all fixings once it is repositioned.
3. Can the stand be used for items other than monitors?
The stand can hold lightweight desk accessories such as speakers or small storage items. Avoid placing items that exceed the recommended weight or create uneven pressure.