HOMCOM C Shaped Side Table Assembly Instructions (SKU:83B-599V00RB)

To assemble your HOMCOM C Shaped Side Table, follow these easy steps, and you’ll have your new piece of furniture ready in no time. This stylish and functional side table is perfect for your living room or bedroom. With an adjustable height and sturdy metal base, it provides great versatility for your home space.

C-shaped bedside table with lamp, coffee cup, and phone.

Safety Instructions:

Before you start assembling the table, keep the following safety tips in mind:

Assembly Safety: Handle all parts carefully to avoid injuries such as pinching or cuts.
Children’s Safety: Children should not be in the vicinity during assembly. Always supervise them when the table is in use.
Check for Damage: Verify that all parts and hardware are free from damage before starting the assembly process.

Gather All the Parts and Tools

Before beginning assembly, make sure you have all the necessary parts:

A – Table Top (1)
B – Vertical Post (1)
C – Extension Pole (1)
D – Base Plate (1)
E – Adjustment Knob (1)

Labeled table components including tabletop, poles, base, and knob.

Also, gather the following tools:

M6 x 10 Screws(8)
M6 Nuts(4)
Allen Key(1)

M6 bolts, hex nuts, and Allen key hardware set.

Step-by-Step Assembly Instructions

Follow these steps for a seamless assembly of your HOMCOM C Shaped Side Table.

Diagram showing detached table parts labeled A through E.

Step 1: Attach the Extension Pole to the Base Plate

Square pole with base plate being bolted to metal base.

Place the Base Plate (D) on a flat, stable surface with the pre-drilled holes facing upward.
Align the mounting holes at the bottom of the Extension Pole(C) with the holes in the Base Plate(D).
From underneath the Base Plate, insert four M6 x 10 Screws (①) through the holes in the base and into the bottom of the Extension Pole.
Hand-thread four M6 Nuts (②) onto the screws to secure the connection.
Using the Allen Key, fully tighten all 4 screws securely.

Step 2: Attach the Vertical Post to the Table Top

Round table leg being screwed into wooden tabletop underside.

Take the Table Top (A) and position it so the pre-drilled holes on the underside are accessible.
Align the top end of the Vertical Post (B) with the mounting holes on the underside of the Table Top (A).
Insert four M6 x 10 Screws (①) through the holes in the Table Top and into the mounting plate at the top of the Vertical Post.
Using the Allen Key, tighten all 4 screws securely to firmly attach the Table Top to the Vertical Post.

Step 3: Connect the Table Top Assembly to the Base Assembly

Round upper tube sliding into square lower base tube.

Take the Table Top (A) with Vertical Post (B) & Base Plate (D) with Extension Pole (C) assembly.
Align the bottom end of the Vertical Post (B) with the top opening of the Extension Pole (C).
Carefully slide the Vertical Post (B) down into the Extension Pole (C) as indicated by the arrows in the diagram.
Push down firmly until the Vertical Post(B) is fully inserted into the Extension Pole(C) and the connection feels secure.

Step 4: Secure the Height with the Adjustment Knob

Hand tightening a black plastic knob into a metal post.

Take the Adjustment Knob (E) and thread it into the hole on the side of the Extension Pole (C) by turning it clockwise with your hand.
Continue turning the Adjustment Knob until it is hand-tight and securely locks the Vertical Post(B) and Extension Pole(C) together at your desired height.

Final Tightening and Safety Check

Fully assembled C-shaped side table with height adjustment knob.

Make sure the table is assembled as shown in the image.
Verify that all connections are tight and stable.
Test the table’s stability by gently applying pressure from different angles to ensure there is no wobbling or movement.

IMPORTANT SAFETY WARNING:

Do not place excessive weight on the table top
Do not allow children to climb on or hang from the table
Do not use the table as a step stool or ladder
Ensure the table is on a flat, level surface during use

Troubleshooting Tips

If the table top isn’t secure: Double-check that all screws are tightened, but not overly tightened. Ensure that the parts are aligned correctly before fastening them.
If the table is wobbly: Recheck the screws on the base and table top to ensure they are tightened properly.

Maintenance and Care Tips:

Dusting: Regularly wipe the table with a soft cloth to remove dust and maintain its finish.
Cleaning: If needed, clean the table top with a damp cloth. Dry immediately to avoid any watermarks.
Height Adjustment: Occasionally check the adjustment mechanism to ensure it works smoothly.

You can download the complete assembly manual for the HOMCOM C Shaped Side Table (SKU:83B-599V00RB) for your reference.

Download Manual (PDF)

FAQs

1. What should be avoided placed on the table for long-term use?

The table is best used for lightweight items such as books, laptops, or drinks. Heavy décor, aquariums, or heat-producing appliances should be avoided, as they can strain the frame over time. Keeping weight evenly distributed helps maintain stability.

2. Is the tabletop resistant to minor spills or moisture?

The surface can handle small spills if wiped immediately. Leaving moisture for long periods may affect the finish, so coasters or trays are recommended. Always dry the surface fully after cleaning.

3. Is the table suitable for laptop or work-from-sofa use?

The table works well for light laptop use, reading, or writing. It’s comfortable for short work sessions while seated on a sofa. Avoid leaning heavily on the tabletop or using it for extended work hours.