HOMCOM Pull-Out Bin with Dual Compartments & Frosted Lid – (SKU:851-073V01GY)

Assembling the HOMCOM Pull-Out Bin requires attention to detail to ensure a smooth setup process. We will walk you through each essential step, from verifying the parts and hardware to the final placement of containers and the lid. Whether you’re assembling the unit in a kitchen or another space, following the instructions carefully will help you avoid any complications.

Important Note: Front Panel Fitting Limitations

Before beginning the assembly process, please be aware of the following:

• The front panel cannot be fitted to the door cabinet.

This is an important restriction to note, as the cupboard bin is designed to be installed independently and is not intended to be mounted on a door cabinet.

Maximum Dimensions of the Front Panel:

• Width: 480mm
• Depth: 342mm
• Height: 418mm

Make sure to verify that the space where the cupboard bin will be installed meets these dimension requirements to avoid any fitting issues during assembly.

Step-by-Step Assembly Guide:

Assembling your HOMCOM Pull-Out Bin is a straightforward process that can be completed in just a few simple steps. Let’s get started!

Step 1: Verify Parts and Hardware

Before beginning the installation, ensure you have all the necessary components:

• Parts:
  • Frame (x1)
  • Containers (x2)
  • Lid (x1)
• Hardware:
  • A (x16): M4x16 short screws
  • B (x6): M4x25 long screws
  • C (x4): Brackets

Make sure all parts and hardware are present as indicated to avoid interruptions during setup.

Step 2: Measure and Position the Frame

Before proceeding with the assembly, you need to measure 88mm from the front face of the cabinet. This ensures the frame is positioned correctly without any obstruction from above or the sides.

• Action: Position the frame accordingly, making sure to account for any obstacles.
• Next: Fit the two long screws through the central holes to secure the frame.

Step 3: Fit Containers and Lid

Before permanently attaching the unit to the cabinet base, follow these instructions:

1. Position the Containers and Lid:
   
   • Place the containers and lid into position to ensure ease of opening and removal.
   • Make sure there are no obstructions from door hinges or other elements that could interfere with the unit’s operation.
2. Test the Operation:
   • Test the ease with which the containers and lid open and close.
   • Ensure everything operates smoothly before continuing.

Tip: If adjustments are needed to ensure smooth operation, make them before permanently fixing the unit in place.

Step 4: Attach the Brackets to the Cabinet Base

1. Secure the Brackets:
   • Attach the four brackets to the cabinet base using four short screws and one long screw for each bracket.
   • This ensures the frame is securely fixed to the base and provides stability during operation.
2. Final Check:
   • Make sure each bracket is firmly attached to prevent any shifting or misalignment once the unit is in use.

Step 5: Attach Containers and Lid

1. Position the Containers and Lid:
   • Fit the containers into the frame, followed by placing the lid securely on top. Ensure both the containers and the lid are aligned properly for smooth operation.
2. Test Functionality:
   • Test the containers and lid to confirm they open and close with ease. If adjustments are needed for a better fit, make them before finalizing the assembly.

By following these steps, your HOMCOM Pull-Out Bin will be properly assembled and ready for use. This article ensures that you will avoid common issues like misalignment or fitting problems, providing a smooth and hassle-free installation experience.

You can download the full HOMCOM Pull-Out Bin – SKU: 851-073V01GY manual below.

Thank you for choosing HOMCOM, designed for efficient waste management and modern home organization. For replacement parts or product inquiries, contact Aosom LLC’s Customer Service for expert assistance.

FAQs

1. What is the best way to organize waste in the dual compartments?

You can use the compartments for separating general waste from recycling or use one side for trash and the other for composting, depending on your needs.

2. How do I maintain the sliding mechanism for smooth operation?

To keep the sliding mechanism functioning smoothly, periodically clean the rails and apply a small amount of lubricant to avoid dust and debris buildup.

3. Can the HOMCOM Pull-Out Bin be installed without a cabinet?

The HOMCOM Pull-Out Bin is specifically designed to be installed inside a cabinet. It cannot be used as a standalone unit without installation in a cabinet structure.