The HOMCOM Round Dining Table is a sturdy and modern piece designed for everyday dining and compact living spaces. Featuring a durable tabletop, supported by strong inner and outer leg frames, and reinforced with cross-stretchers, it ensures stability and long-term use. Its simple screw-based assembly system allows for a straightforward and efficient setup.
Warning & Safety Instructions
Before starting assembly, carefully follow these safety guidelines:
- Adult assembly is recommended.
- Keep children away during assembly.
- Do not fully tighten screws until all parts are connected.
- Use only on a flat, clean surface.
- Ensure all parts are present before starting.
- Do not use it, if any component is damaged.
Unboxing: Parts & Hardware
Parts List
| Part ID | Quantity | Description |
| 1 | 1 | Tabletop |
| 2 | 1 | Inner Leg Frame |
| 3 | 1 | Outer Leg Frame |
| 4 | 1 | Lower Cross-Stretcher |
| 5 | 1 | Upper Cross-Stretcher |
Hardware List
| Hardware | Quantity | Description |
| A | 5 (+1 spare) | M6*40 Screws |
| B | 4 (+1 spare) | M6*50 Screws |
| C | 4 | Levelling Feet |
| D | 1 | Hex Nut |
| J | 1 | Wrench |
| Y | 1 | Allen Key |
Step-by-Step Assembly Instructions
Step 1: Assemble Frames with Cross-Stretchers
- First, take the Outer Leg Frame (3) and place it perpendicular to the floor, with the legs pointing upwards.
- Then position the Inner Leg Frame (2) inside it and align both frames properly as shown in image.
- Now take the Lower Cross-Stretcher (4) and Upper Cross-Stretcher (5) and join them together in a cross shape.
- Insert the M6*40 Screw (A) through the centre hole of the stretchers.
- Secure it from the top using the Hex Nut (D) and tighten lightly using the Wrench (J).
Step 2: Attach Cross-Stretchers to Leg Frame
- First, place the assembled leg frame structure on the floor with the legs pointing upwards.
- Position the cross-stretcher assembly (4 & 5) at the bottom section of the leg frame.
- Carefully align the holes of the cross-stretchers with the holes on the leg frames.
- Insert the M6*50 Screws (B) into the aligned holes.
- Use the Allen Key (Y) to tighten the screws securely.
- After securing the frame, install the Levelling Feet (C) onto the bottom of each leg.
- Ensure all connections are tight and properly aligned.
Step 3: Attach the Tabletop
- Place the Tabletop (1) on a flat, clean surface with the underside facing upwards.
- Lift the assembled leg frame and carefully position it onto the underside of the tabletop.
- Align the holes of the leg frame with the pre-drilled holes on the tabletop.
- Insert the M6*40 Screws (A) into each hole.
- Use the Allen Key (Y) to tighten all screws securely.
- Ensure the frame is properly centred and firmly attached to the tabletop.
Step 4: Final Setup and Adjustment
- Carefully turn the table upright and place it on a flat surface.
- Check that all legs are evenly positioned and the table stands stable.
- Tighten all screws fully using the Allen Key (Y) if any remain loose.
- Adjust the Levelling Feet (C) if needed to eliminate wobbling.
- Ensure the tabletop is secure and the frame is properly aligned.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table wobbles | Uneven floor or loose screws | Adjust levelling feet and tighten screws |
| Frame unstable | Screws not fully tightened | Recheck and secure all connections |
| Difficulty assembling | Parts misaligned | Re-align frames before tightening |
Care & Maintenance
- Clean with a soft, damp cloth.
- Avoid harsh chemical cleaners.
- Tighten screws periodically to maintain stability.
- Keep away from excessive moisture or direct heat.
With its durable tabletop, reinforced cross-stretchers, and stable leg frame design, the HOMCOM Round Dining Table (SKU: 835-935V00) offers a reliable and stylish solution for everyday use. Proper assembly and routine maintenance will ensure long-lasting performance and stability.
You can also download the Round Dining Table (SKU: 835-935V00) manual for your reference.
FAQs
1. Is a round dining table better than a rectangular one?
Round dining tables are often better for smaller rooms as they improve flow and make conversation easier with everyone facing each other. They also remove sharp corners, which is useful in busy households. However, rectangular tables can be more practical for larger spaces or when seating more people.
2. Are round dining tables suitable for open-plan spaces?
Round tables work well in open-plan layouts by softening the overall look and creating a natural focal point. They help define the dining area without making the space feel rigid or crowded. This makes them a practical choice for blending dining with living or kitchen areas.
3. Do round dining tables help save space?
Yes, round tables can make a room feel more spacious as they allow smoother movement with no corners to navigate. They are particularly effective in compact or awkward layouts. While they may seat fewer people than rectangular tables, they often use space more efficiently.