The 2 Seater Sofa is designed to combine comfort, stability, and modern style for everyday use in living rooms, bedrooms, or lounge spaces. Featuring a supportive backrest, cushioned seat, sturdy armrests, and reinforced support legs, this sofa offers both durability and relaxation. With a structured multi-step assembly process, it ensures a secure and long-lasting setup.
Warning & Safety Instructions
Before starting assembly, carefully follow these safety guidelines:
- Assembly should be carried out by a competent adult.
- Keep children away during assembly to avoid injury.
- Place all components on a flat, clean surface before assembly.
- Ensure all parts and hardware are present before beginning.
- Do not use the product if any component is damaged or missing.
Unboxing: Parts & Hardware
Parts List
| Part ID | Quantity | Description |
| A | 1 | Seat Cushion |
| B | 1 | Backrest |
| C | 1 | Left Armrest |
| D | 1 | Right Armrest |
| E | 2 | Support Legs |
| F | 4 | Felt Pads |
Hardware List
| Hardware | Quantity | Description |
| 1 | 2 | M6x70mm Bolt |
| 2 | 4+1 (spare) | M6x45mm Bolt |
| 3 | 11+1 (spare) | M6x50mm Bolt |
| 4 | 11+1 (spare) | M6x18mm Flat Washer |
| 5 | 1 | Allen Key |
Step-by-Step Assembly Instructions
Step 1: Attach Backrest to Seat Cushion
- Place the Seat Cushion (A) upright on a flat, clean surface.
- Position the Backrest (B) against the rear edge of the Seat Cushion (A), aligning the pre-drilled holes on both parts.
- Insert the M6x50mm Bolts (3) through the Flat Washers (4) and into the aligned holes connecting the Backrest (B) to the Seat Cushion (A).
- Use the Allen Key (5) to tighten each bolt securely, ensuring the backrest is firmly attached.
- Do not fully tighten all bolts at once, tighten gradually to keep the alignment even.
Step 2: Install Left Armrest to Seat Frame
- Position the Left Armrest (C) on the side of the sofa frame, aligning it with the pre-drilled holes on the seat structure.
- Insert the M6x70mm Bolt (1) through the top hole of the armrest connection point.
- Insert the M6x45mm Bolt (2) into the lower hole, ensuring both bolts pass through the aligned frame correctly.
- Use the Allen Key (5) to tighten both bolts securely, but do not fully tighten yet to allow slight adjustment in later steps.
Step 3: Install Right Armrest to Seat Frame
- Position the Right Armrest (D) on the opposite side of the sofa frame, aligning it with the pre-drilled holes on the seat structure.
- Insert the M6x70mm Bolt (1) through the upper hole of the armrest connection point.
- Insert the M6x45mm Bolt (2) into the lower hole, ensuring both bolts pass through the aligned frame properly.
- Use the Allen Key (5) to tighten both bolts securely, but do not fully tighten yet to allow final alignment adjustments.
Step 4: Attach Support Legs to sofa Frame
- Position the Support Legs (E) at the bottom corners of the sofa frame, aligning them with the pre-drilled holes.
- Insert the M6x50mm Bolts (3) through the Flat Washers (4) and into the aligned holes on each leg.
- Ensure each washer is placed between the bolt head and the frame for proper support and stability.
- Use the Allen Key (5) to tighten all bolts securely.
Step 5: Attach Felt Pads to Support Legs
- Take the Felt Pads (F) and position one at the bottom of each leg.
- Press each felt pad firmly onto the base of the legs to ensure proper adhesion.
- Make sure all pads are evenly placed to protect flooring and improve stability.
Final Step: Assembly Complete
- Carefully turn the sofa upright so it stands properly on the floor using the Support Legs (E).
- Ensure all bolts are fully tightened using the Allen Key (5) for maximum stability.
- Check that the Backrest (B), Left Armrest (C), and Right Armrest (D) are properly aligned and securely fixed.
- Confirm that all Support Legs (E) are evenly positioned and the sofa stands flat without wobbling.
- Verify that the Felt Pads (F) are firmly attached to protect the floor and improve balance.
Your upholstered sofa is now fully assembled and ready for comfortable everyday use.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Sofa feels unstable | Bolts not fully tightened | Tighten all bolts securely |
| Armrests misaligned | Incorrect positioning | Loosen and re-align, then tighten |
| Backrest loose | Bolts not secured properly | Re-tighten all connections |
Care & Maintenance
- Clean the fabric using a soft brush or vacuum regularly.
- Wipe frame parts with a dry or slightly damp cloth.
- Avoid placing the sofa in damp or humid areas.
- Periodically check and tighten all bolts for continued stability.
With its supportive structure, cushioned seating, and durable frame, this Small Sherpa 2 Seater Sofa offers a practical and stylish addition to any space. Proper assembly and regular maintenance will ensure long-lasting comfort and performance.
You can also download the Small Sherpa 2 Seater Sofa (83B-333V70CW) assembly manual for your reference.
FAQs
1. Is a sherpa 2 seater sofa suitable for everyday use?
A sherpa 2 seater sofa can be used daily if it’s built with a solid frame and supportive cushions. The soft, cosy fabric makes it comfortable for regular lounging, especially in smaller spaces. It’s best suited for moderate use rather than constant heavy seating.
2. How do you clean a sherpa fabric sofa properly?
To clean sherpa fabric, use a soft brush or vacuum to remove dust, then gently spot clean with a mild solution. Avoid excessive water, as it can flatten or damage the texture. Regular light cleaning helps maintain its soft and fluffy feel.
3. Is sherpa upholstery durable for long-term use?
Sherpa upholstery is reasonably durable when cared for properly and used in low to medium traffic areas. It holds its softness well but may show wear quicker than tougher fabrics over time. Proper maintenance can extend its look and comfort for years.