Outsunny Rattan Garden Furniture Set Assembly Manual (SKU: 860-066V01GY )

Outdoor rattan chairs with ottomans and table setup

This Outdoor Lounge Set is designed to bring comfort and structure to your garden or patio space. It includes two armchairs, two ottomans, and a matching table, offering a balanced setup for relaxation and casual use. With clearly labelled components and a step-by-step process, the assembly is straightforward when followed carefully, taking approximately 180 minutes with two people recommended.

Warning & Safety Instructions

Before beginning, it is important to follow basic safety guidance to ensure a smooth and secure assembly:

Assemble on a flat, stable surface to avoid imbalance.
Keep children away during assembly to prevent injury.
Do not use the product if any part is damaged or missing.
Avoid tightening bolts fully until all sections are aligned.
Be cautious of pinch points during frame assembly.
Do not exceed the recommended weight capacity.

Unboxing: Parts & Hardware

Parts List

Illustrated parts diagram showing labeled furniture components

Part ID	Quantity	Description
A	2	Chair Left Armrest
B	2	Chair Right Armrest
C	2	Chair Seat Frame
D	2	Chair Backrest
E	4	Ottoman Side Panels
F	2	Ottoman Seat Frame
G	1	Table Top Frame
H	2	Table Side Frame
I	2	Table Side Frame without legs
L	2	Chair Seat Cushion (Striped flat cushion)
M	2	Ottoman Cushion (Striped cushion for the footstool)
N	2	Chair Back Cushion

Hardware List

Bolts and washers with quantities and spare parts

Hardware	Quantity	Description
J	52 + 5 (spare)	Bolts
K	52 + 5 (spare)	Washers

Step-by-Step Assembly Instructions

Step 1: Attach Chair Seat Frame to Left Armrest

Place the Chair Left Armrest (A) on a flat, stable surface.
Position the Chair Seat Frame (C) inside the armrest, aligning the pre-drilled holes as shown in the diagram.
Insert the Bolts (J) through the aligned holes, adding a Washer (K) between the bolt head and the frame.
Tighten the bolts gradually using the appropriate tool, ensuring the frame sits securely within the armrest.
Do not fully tighten all bolts at once, slightly adjust first to ensure proper alignment before final tightening.

Step 2: Attach Chair Backrest

Backrest panel fixed to chair frame with bolts

Take the partially assembled frame.
Position the Chair Backrest (D) at the rear side of the structure, aligning it with the Chair Seat Frame (C) and Left Armrest (A).
Match the pre-drilled holes carefully to ensure correct positioning.
Insert the Bolts (J) through the aligned holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts securely, but keep a slight allowance for adjustment until all chair components are fully assembled.

Step 3: Secure Backrest to Seat Frame from Lower Section

Bolt and washer fastening chair frame connection

With the frame still positioned upside down, align the lower section of the Chair Backrest (D) with the Chair Seat Frame (C).
Ensure the connection points line up correctly on the inner side of the frame.
Insert the Bolts (J) through the holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts gradually, ensuring both sides are evenly secured.
Check that the backrest remains straight and properly aligned with the armrest and seat frame.

Step 4: Attach Right Armrest to Complete Chair Frame

Position the Chair Right Armrest (B) on the open side of the partially assembled frame.
Align it carefully with the Chair Seat Frame (C) and Chair Backrest (D).
Ensure all pre-drilled holes match correctly before inserting any hardware.
Insert the Bolts (J) through the aligned holes, placing a Washer (K) between the bolt head and the frame.
Tighten each bolt gradually, working evenly across all connection points to maintain alignment.
Once all bolts are in place, fully tighten them to secure the structure.

Step 5: Install Chair Cushions

Turn the fully assembled chair upright and place it on a flat surface.
Position the Chair Seat Cushion (L) evenly on the seat frame.
Place the Chair Back Cushion (N) against the backrest.
Adjust both cushions to ensure they sit neatly within the frame and provide proper support.

Note: Repeat steps 1-5 to assemble the second chair.

Step 6: Attach First Ottoman Side Panel

Ottoman frame side panel attached with bolts

Place the Ottoman Seat Frame (F) on a flat, stable surface.
Position one Ottoman Side Panel (E) against one side of the frame.
Align the pre-drilled holes carefully to ensure proper fit.
Insert the Bolts (J) through the holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts from the inner front side of the frame, as shown in the diagram, ensuring a secure connection.
Tighten the bolts lightly to hold the panel in place while allowing minor adjustment.

Step 7: Secure the Back Inner Side of the Ottoman Frame

Secure frame joint with bolt and washer tightening

Keep the ottoman frame from Step 6 positioned upside down.
Locate the inner back side connection points between the Ottoman Side Panel (E) and Ottoman Seat Frame (F).
Insert the Bolts (J) from the inside back section of the frame.
Place a Washer (K) with each bolt before tightening.
Tighten the bolts carefully to secure the back inner side connection.

Step 8: Complete Ottoman Frame Assembly (Final Side Connection)

Ottoman frame fully assembled with side panels

Take the partially assembled ottoman frame from Step 7.
Position the remaining Ottoman Side Panel (E) securely in place (if not already fully aligned).
Align the final connection points between the Side Panel (E) and Ottoman Seat Frame (F).
Insert the Bolts (J) through the holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts from the inner section of the frame, as shown in the diagram.
Ensure all sides are now properly connected and aligned.

Step 9: Final Inner Fixing of Ottoman Frame

Keep the ottoman frame in position after Step 8.
Locate the remaining inner connection points between the Ottoman Side Panels (E) and Seat Frame (F).
Insert the Bolts (J) from the inner side of the frame, as indicated in the diagram.
Place a Washer (K) with each bolt before tightening.

Step 10: Place Ottoman Cushion

Turn the fully assembled ottoman upright and place it on a flat surface.
Position the Ottoman Cushion (M) evenly on top of the frame.
Adjust the cushion so it sits neatly within the edges of the ottoman.

Note: Repeat Steps 6–10 to assemble the second ottoman.

Step 11: Assemble Table Base Frame (Initial Setup)

Base frame with curved legs and bolt fixing

Place the Table Top Frame (G) flat on a stable surface.
Position the Table Side Frame (H) on one side of the frame.
Attach the Table Side Frame without legs (I) on the opposite side.
Align all connection points carefully with the pre-drilled holes.
Insert the Bolts (J) through the holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts gradually, ensuring the structure remains square and aligned.

Step 12: Secure Table Frame Inner Side Connections

Bolt fixing inner joints of table structure

Take the partially assembled table frame from Step 11.
Position the Table Side Frame (H) correctly against the structure as shown in image.
Align the inner connection points with the Table Top Frame (G) and other side frames.
Insert the Bolts (J) from the inner side of the frame, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts evenly to secure the inner connections.

Step 13: Attach Front Table Side Frame (Without Legs)

Attach side panel to frame using bolts and washers

Take the partially assembled table frame from Step 12.
Position the Table Side Frame without legs (I) at the front side of the structure.
Align it carefully with the Table Top Frame (G) and the side frames (H).
Ensure all pre-drilled holes match correctly.
Insert the Bolts (J) through the holes, placing a Washer (K) between the bolt head and the frame.
Tighten the bolts gradually to secure the front side connection.

Step 14: Secure Final Inner Side Connections of Table Frame

Tightening bolts inside table frame corners

Take the partially assembled table frame from Step 13.
Locate the remaining inner connection points on the Table Side Frame without legs (I).
Align these points with the adjacent side frames (H).
Insert the Bolts (J) from the inner side of the frame, placing a Washer (K) between the bolt head and the frame.
Tighten both bolts evenly to secure the final connections.

Step 15: Assembly Complete – Table Ready for Use

Fully assembled square table with four legs

Turn the fully assembled table upright and place it on a flat, stable surface.
Check that all sides are even and the table stands without wobbling.
Ensure all bolts from previous steps are fully tightened.

Final Step: Complete Set Assembly

Two chairs, table, and ottomans assembled

Place both assembled chairs, ottomans, and the table on a flat, stable surface.
Arrange the pieces as desired to create a balanced and comfortable seating layout.

Your complete chair, ottoman, and table set is now fully assembled and ready for relaxation and everyday use.

Troubleshooting Guide

Issue	Possible Cause	Solution
Chair feels unstable	Loose bolts	Tighten all connections
Frame misaligned	Parts assembled unevenly	Loosen and realign before tightening
Table wobbling	Uneven surface	Adjust placement and check joints
Cushions not fitting properly	Incorrect placement	Reposition evenly within frame

Care & Maintenance

Clean frames with a soft cloth to prevent scratches.
Keep cushions dry to avoid moisture build-up.
Store in a covered area during harsh weather.
Regularly check and tighten bolts for long-term stability.
Avoid leaving water on surfaces to maintain durability.

With its sturdy frame construction, well-balanced design, and comfortable cushioned seating, this Rattan Garden Furniture Set (SKU:860-066V01GY) offers a practical and stylish solution for everyday relaxation. Careful assembly and routine maintenance will help ensure long-lasting stability and performance.

You can also download the Outsunny Rattan Garden Furniture Set full assembly manual for reference.

Download Manual(PDF)

FAQs

1. Can rattan garden furniture be left outside all year?

High-quality synthetic rattan can stay outdoors all year, as it is designed to handle changing weather conditions. However, long exposure to frost, snow, and moisture may reduce its lifespan over time. Using covers and storing cushions indoors helps keep it in better condition.

2. Is rattan garden furniture waterproof?

Synthetic rattan is water-resistant and can cope with light rain without immediate damage. It is not fully waterproof, as moisture can still affect cushions and internal frames if left exposed. Drying the furniture and using covers helps prevent long-term issues.

3. Does rattan furniture fade in the sun?

Most rattan furniture includes UV protection to minimise fading from sunlight exposure. Over time, constant direct sun can still cause slight colour fading or dullness. Keeping it in shaded areas or using covers helps maintain its original appearance.