The HOMCOM Linen Chair Bed can be used as a chair, recliner, or bed. It comes with an adjustable backrest and pillow. This guide will help you assemble your chair bed step by step. Assembly takes about 30 minutes with 1-2 people.
Assembly Preparation Checklist
- Assemble on a flat, clean surface.
- Keep all parts grouped and organized before starting.
- Do not fully tighten bolts until the entire frame is assembled.
- Two people are recommended for easier handling and alignment.
Parts & Hardware List
Parts
| Part | Quantity | Description |
| A | x1 | Seat & Backrest Main Unit |
| B | x1 | Bottom Support Frame |
| C | x1 | Pillow |
| D | x4 | Adjustable Legs |
| E | x1 | Allen Key |
Hardware
| Hardware | Quantity | Description |
| M6*40 Bolts | 8 | Main connection bolts (4 for seat, 4 for frame) |
Assembly Instructions
Follow the steps carefully to assemble your HOMCOM Linen Chair Bed and ensure proper installation and safe usage.
Step 1: Remove Pre-inserted Bolts from Seat Unit (Part A)
- Place Part A (Seat & Backrest Main Unit) upside down on a soft surface to protect the fabric.
- Use Part E (Allen Key) to unscrew and remove the M6*40 pre-inserted bolts from the bottom of the seat unit.
Step 2: Attach Bottom Support Frame (Part B) to Seat Unit (Part A)
- Align Part B (Bottom Support Frame) with the holes on the underside of Part A.
- Insert and re-fasten the M6*40 bolts through the frame into the seat base.
- Use Part E (Allen Key) to tighten all bolts evenly and securely.
- Confirm the frame is flush, centered, and stable before flipping upright.
Step 3: Install Adjustable Legs (Part D)
- Screw the 4 Adjustable Legs (Part D) into the threaded holes on the bottom of the support frame.
- Rotate clockwise until firmly tightened.
- Ensure all legs are evenly adjusted for stability.
Place the unit upright carefully.
Step 4: Position the Pillow (Part C)
- Place Part C (Pillow) against the backrest.
- Adjust positioning for comfort.
Assembly Complete! Your HOMCOM Linen Chair Bed is now ready to use.
Need Help?
If you had difficulty with assembly or found a part missing or damaged, please don’t hesitate to contact us for a solution. Our Aosom Customer Service team will work hard to put a smile back on your face.
Operating Instructions (3-in-1 Function)
Step 5: Open the Back Zipper
- Locate the zipper at the rear of the backrest.
- Carefully unzip it downward to access the hidden legs.
- Take out the legs carefully.
Step 6: Extend the Lower Base Platform
- Stand in front of the chair.
- Hold the front edge of the seat.
- Pull the lower base platform straight forward until it is fully extended.
- Make sure the platform legs are properly positioned and stable.
- Then unfold the seat.
Step 7: Adjust the Backrest Position
To change positions, follow this two-motion system:
- Lift the backrest forward (upward) first to release the locking mechanism.
- Then lower the backrest backward into your desired position.
Always confirm the backrest is securely locked before sitting or lying down.
Safety Instructions
- Do not exceed recommended weight capacity.
- Ensure all bolts are tightened before use.
- Keep fingers clear when adjusting the backrest.
- Periodically re-check bolt tightness.
Care & Maintenance
To maintain the quality and appearance:
- Vacuum linen upholstery regularly.
- Spot clean with mild detergent and damp cloth.
- Avoid harsh chemical cleaners.
- Do not overload or jump on the frame.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Chair feels unstable | Bolts not fully tightened | Re-tighten all bolts |
| Backrest not adjusting smoothly | Internal mechanism misaligned | Recheck frame alignment |
| Uneven legs | Leg not screwed fully | Adjust leg height |
You can also download the complete assembly manual for the HOMCOM Linen Chair Bed (SKU:833-066V70BU) for your reference.
FAQs
1. What's the difference between the backrest positions, how many are there?
The backrest has 5 adjustable positions ranging from upright (90°) to fully flat (180°). Each position locks securely, allowing you to customize your comfort level. Whether you want to sit upright, recline slightly, or lay completely flat for sleep, you can find the perfect angle for your needs.
2. Is the bottom support frame metal or wood?
The bottom support frame is made of powder-coated metal, not wood. This metal construction makes it more durable and rust-resistant, ensuring long-lasting performance. The metal frame also keeps the chair bed lightweight, making it easy to move from room to room when needed.
3. How do I know if the backrest is locked in place?
Listen for the click sound when adjusting the backrest, that’s your confirmation it’s locked. After hearing the click, give the backrest a gentle push test before sitting down. If it stays firmly in place without moving, you’re good to go and can safely use the chair.
4. How often should I check the bolts?
You should check and tighten the bolts every 2-3 months to maintain stability. This is especially important if you frequently switch between chair, recliner, and bed modes. The quick 2-minute maintenance check keeps everything safe, stable, and functioning properly.
5. What if I lose the Allen key?
No worries if you lose the included Allen key, it’s a standard hex key size. You can easily pick up a replacement at any hardware store for just a couple of pounds. You might even have a matching size in your existing home toolkit that will work perfectly.