HOMCOM Industrial Console Table Assembly Instructions – SKU:837-171GY

The HOMCOM Industrial Console Table combines a sturdy metal frame with a wood-effect tabletop to create a practical and modern piece for everyday use. Its slim design makes it suitable for hallways, living rooms, or placement behind a sofa, offering surface space for décor while keeping the area organised and uncluttered.

This article explains the assembly process step by step, covering the frame construction, tabletop fitting, and safety fixing. With basic tools and careful alignment, the table can be assembled efficiently and securely.

Before You Begin Assembly

Taking a few minutes to prepare before starting will help avoid alignment issues and make the process easier.

• Assemble on a flat, clean surface to prevent scratches
• Identify all parts and hardware before starting
• Do not fully tighten screws until the frame is aligned
• Keep fixings grouped by type for easy access

Parts List

Part No.	Part Name	Quantity
1	Side Frame Panels (Left & Right)	2
2	Upper Rear Support Rail	1
3	Upper Front Support Rail	1
4	Lower Support Rail	1
5	Side Support Bar	2
6	Tabletop Panel	1

Hardware List

Hardware Code	Name	Quantity	Description / Use
A	Bolts	x4	Used to secure the side support barto the upper support rails
B	Frame Screws	x6	Used to attach the support rails to the side frame panels
C	Tabletop Screws	x7	Used to fix the tabletop panel to the frame and attach the anti-tip strap
D	Wall Plug	x1	Inserted into the wall for the anti-tip safety fixing
E	Wall Screw	x1	Secures the anti-tip strap to the wall plug
F	Anti-Tip Safety Strap	x1	Prevents the table from tipping forward
G	Allen Key	x1	Tool provided for tightening bolts

Note: A flathead screwdriver (not included) is also required for tightening the screws.

Assembly Steps

Follow the steps below in order to assemble the HOMCOM Console Table correctly and ensure a stable, well-aligned final structure.

Step 01: Assemble the Main Frame

1. Position the two Side Frame Panels (Part 1) upright and parallel to each other on a flat surface.
2. Attach the Upper Rear Support Rail (Part 2) between the top front edges of the side frames.
3. Attach the Upper Front Support Rail (Part 3) between the top rear edges of the side frames.
4. Fix the Lower Support Rail (Part 4) between the bottom inner edges of the side frames.
5. Secure all connections using Frame Screws (Hardware B) and tighten with the Allen Key (Hardware G) as shown in the diagram.

Note: Do not fully tighten the screws at this stage. Leave them slightly loose to allow alignment adjustments in the next steps.

Step 02: Install the side support bars

1. Position the two Side Support Bars (Part 5) diagonally between each Leg Frame and the Upper Rear Support Rail (Part 2), aligning the ends with the pre-drilled holes as shown in the illustration.
2. Secure each side support bar using Bolts (Hardware A) and tighten with the Allen Key (Hardware G) as shown.
3. Tighten the bolts evenly to draw the frame square, but avoid overtightening.
4. Once both braces are installed, check that the frame is level and aligned before proceeding.

Step 03: Attach the Tabletop Panel

1. Carefully place the Tabletop Panel (Part 6) onto the assembled frame, ensuring it sits evenly on both side frames and aligns with the pre-drilled holes underneath.
2. From beneath the tabletop, secure it to the frame using 6 of the Tabletop Screws (Hardware C).
3. Tighten the screws evenly, working from one side to the other to keep the panel centred.
4. Do not overtighten, as this may damage the tabletop or strip the fixings.
5. Once secured, check that the tabletop is level and firmly attached.

Final Step: Secure the Anti-Tip Safety Strap

For added stability and safety, secure the table to the wall using the included anti-tip fixing.

1. Attach the Anti-Tip Safety Strap (Hardware F) to the underside of the Tabletop Panel using the remaining Tabletop Screw (Hardware C).
2. Drill a suitable hole in the wall at the marked position and insert the Wall Plug (Hardware D).
3. Fix the free end of the strap to the wall using the Wall Screw (Hardware E).
4. Ensure the strap is firm but not overly tight, allowing the table to sit flat against the wall without strain.

Final Checks

• Confirm all screws and bolts are fully tightened
• Check the table stands level on the floor
• Press gently on each corner to ensure there is no movement

The console table is now fully assembled and ready for everyday use. Its metal frame provides reliable support, while the wide tabletop offers practical space for decorative and daily items. If any parts are missing or damaged, stop assembly and replace them before use.

Care and Maintenance Tips

• Clean with a soft, dry or slightly damp cloth
• Avoid placing excessive weight on the tabletop
• Recheck screws periodically to maintain stability
• Keep away from prolonged moisture exposure

Common Assembly Mistakes to Avoid

• Tightening screws before the frame is aligned
• Mixing different screw types during assembly
• Skipping the anti-tip safety fixing
• Assembling on an uneven or rough surface

You can download the complete assembly manual for the HOMCOM Console Table (SKU:837-171GY) for your reference.

FAQs

1. What material is best for a console table?

The best material depends on how the table will be used. Solid wood is durable and classic, engineered wood is lightweight and budget-friendly, while metal offers a modern, sturdy feel. Many console tables use mixed materials for balance and style.

2. What is an alternative to a console table?

If a console table does not fit the space, alternatives like floating shelves, narrow bookcases, or wall-mounted desks work well. These options save floor space while still providing storage or display areas.

3. What is another name for a console table?

A console table is often called a sofa table or an entryway table. These names are used because the table is commonly placed behind a sofa or along walls in hallways and entrances.

4. What is the difference between an accent table and a console table?

An accent table is smaller and usually placed next to seating for holding drinks or lamps. A console table is longer and narrower, designed to sit against walls or in entry spaces for display and storage.