Assembling your HOMCOM Nesting Coffee Table Set is a simple process that can be completed in just a few steps. The set includes two tables, each designed for easy assembly. Follow the clear instructions to set them up quickly, and you’ll have a stylish, functional addition to your space in no time.
- Assembly Time: Approximately 15 minutes
- Total Steps: Four easy-to-follow steps for quick setup
Parts and Hardware List
Before beginning assembly, unpack all components and verify that all parts and hardware listed below are included.
Included Parts
- Part ① – Large tabletop (x1)
- Part ② – Table legs for large table (x3)
- Part ③ – Small tabletop (x1)
- Part ④ – Table legs for small table (x3)
Included Hardware
- Hardware A – M8 × 30 mm bolts (x6 + 1 spare)
- Hardware B – M4 × 14 mm screws (x30 + 2 spare)
- Hardware C – Metal mounting plates (x6)
- Hardware D – Allen key (x1)
Let’s Get Started with Assembly
Follow the steps below to assemble the HOMCOM Nesting Coffee Table Set. Each step is clearly outlined, ensuring a smooth assembly process when completed in order.
Step 1: Assemble Legs for the Large Table
- Take Part ② (table leg).
- Attach C (metal mounting plate) to the top of the leg.
- Insert bolt M8×30mm (A) through the plate into pre drill leg hole.
- Tighten using Allen key (D).
Repeat until all three legs for the large table are prepared.
Step 2: Attach Legs to the Large Tabletop
- Position the assembled legs onto Part ① (large tabletop)
- Align the mounting plates with the holes
- Secure the plates using M4×14mm screws (B).
- Tighten the screws fully.
The large table assembly is completed.
Step 3: Assemble Legs for the Small Table
- Take Part ④ (small table leg)
- Attach C (metal mounting plates)
- Secure with A (M8×30mm bolts)
- Tighten using Allen key (D)
Repeat until all three legs for the small table are prepared.
Step 4: Attach Legs to the Small Tabletop
- Position the assembled legs onto Part ③ (small tabletop)
- Align the mounting plates correctly
- Secure the plates using B (M4×14mm screws)
- Fully tighten the screws
Assembly Completion
After all steps are completed:
- Check that all screws and bolts are tightened
- Place both tables upright
- Wipe the surfaces clean using a soft microfiber cloth.
Care & Maintenance
Proper care helps keep your HOMCOM Nesting Coffee Table Set stable and looking its best over time.
- Clean the tabletops regularly using a soft, dry, or slightly damp microfiber cloth to remove dust and smudges.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these may damage the surface finish.
- Periodically check screws and bolts for tightness, especially if the tables are moved frequently.
- Keep the tables dry and wipe up spills promptly to prevent moisture from affecting the material.
- When not in use, nest the smaller table smoothly under the larger one to reduce unnecessary handling and wear.
Safety Precautions
Following these precautions helps ensure safe use and long-term stability.
- Always place the tables on a flat, level surface to prevent tipping or uneven weight distribution.
- Do not stand, sit, or climb on the tables, as they are designed for light household use only.
- Avoid dragging the tables across the floor; lift them carefully to prevent damage to the legs and flooring.
- Keep the tables away from excessive heat sources, such as heaters or direct flames.
- Ensure children do not lean heavily on the tables or use them as support for climbing.
You can download the assembly manual for the HOMCOM Nesting Coffee Table Set (SKU:83B-372V00WN).
If you need replacement parts or have questions about this product, please contact Aosom Customer Service for reliable support and assistance.
FAQs
1. Why does my nesting coffee table wobble after assembly?
Wobbling usually happens when mounting plates are not fully aligned or screws are unevenly tightened. Loosening and retightening the screws evenly across all legs typically resolves the issue.
2. What should I do if a screw does not tighten fully during assembly?
If a screw does not tighten smoothly, remove it and check the alignment of the mounting plate. Reinsert the screw straight into the hole and tighten gently. Avoid forcing the screw, as proper alignment usually resolves the issue.
3. Can I assemble the tables without using the Allen key provided?
The included Allen key is specifically designed to fit the bolts used in this table set. Using it helps ensure the bolts are tightened correctly without damaging the hardware. Using other tools may result in improper tightening or stripped bolts.
4. Is it safe to move the tables once they are fully assembled?
Yes, the tables can be moved after assembly, but they should always be lifted rather than dragged. Lifting helps prevent strain on the legs and reduces the risk of floor scratches. Avoid lifting the tables by the edges of the tabletop.
5. Are the legs interchangeable between the large and small table?
No, the legs are designed to match their specific tabletop sizes. Using the correct legs ensures proper alignment and stability. Always attach each set of legs to the table.